Roofing North Andover

Roofing installation is a process that can be intimidating, but it doesn’t have to be. There are many different types of roofs and there are various ways the roofer may go about installing them. You may find yourself wondering what will happen during the process, which is common for someone with little experience in this type of work. Some homeowners feel like they might be treated as an outsider since they don’t know anything about roofing. However, this is far from the truth when you work with a reputable contractor.

Roofers are not only knowledgeable, but also very patient and willing to explain what will happen before, during, and after the roof is installed. Additionally, roofers like to ensure their customers are comfortable the entire time. This is even more reason for you to feel at ease when working with a contractor you trust. There are multiple different types of roofs, but all are installed similarly. Here is what to expect during the roofing installation process:

PREPARATION

If you are planning on using your existing roof for your new installation, the first step will be to prepare it for the new material. Generally, this will involve removing any building materials like plywood or felt paper that might have been used before to remove traces of a previous leak or water damage. This can be done by simply prying off any installed pieces and replacing them with the appropriate material after the new installation has been completed. If however, you need a drywall install is going to take place, then there is going to be an additional step involved –

preparing the roof decking. In this case, what needs to be done is that holes that pass through all of these areas need to be notched for the drywall to fit through.

PREPARATION
ROOF REMOVAL

ROOF REMOVAL

Without a doubt, the roof will have been secured in one way or another over the years that it has been in place. If you are going with a shingle-type material, this will most likely need to be cut every few feet to remove it from all of its attachments. A shearing machine can be used for this part of the process which is a power-operated cutting device that makes short work out of what might otherwise take hours. Of course, if your new style is something like metal panels, you won’t have any removal issues at all because these types of materials simply slide right off so there’s nothing else to do here.

CLEANING

With the roof now completely bare, it’s time to make sure that any dust or debris is cleaned up before you start installing your new material. If you are replacing an asphalt-based type like shingles, then this means that all of the nails also need to be pulled out and disposed of. If however, your replacement happens to be metal panels, then you don’t have to worry about this step at all because nails aren’t used on these types of installations. At this point, the only issue might be if there were flashings involved in attaching the old material which can go bad after being baked by the sun for several years so they might need replacing as well. In this case, it’s a good idea to make sure that the step flashing which goes around chimneys and vents is replaced with either new caulking or metal pieces.

CLEANING
INSTALLATION OF NEW ROOFING MATERIAL

INSTALLATION OF NEW ROOFING MATERIAL

At long last, it’s time to install your new roofing material. Of course, if you are going with a shingle style then this step will involve putting them in place on top of all existing nails for a secure fit. If however, you have chosen a metal panel installation, then these panels will need to be screwed down as opposed to using nails so it may take longer depending on the size of your roof. In any case, though, you can expect this part of the process to take anywhere from several hours to several days depending on the size of your roof.

FINISHING TOUCHES

FINISHING TOUCHES

The final step in the process will be that of adding finishing touches like adding strips or shingles around vents, chimneys, and other protrusions which are part of the roof’s structure. Of course, you can also add any decorative accents to suit your tastes if they weren’t done at the factory before they left for delivery so this is a good time to do it. Unlike metal panels, most shingle roofs need these steps taken care of because without them you run the risk of leaks developing over time due to water being able to travel down these areas unbeknownst to you until it ends inside your home instead of safely on the ground. With that said, if you were to do it yourself then this would be the simplest time to complete tasks like removing shingles that are blowing up or otherwise compromised to make way for your new roof.

If however, there is damage done to either the decking of the roof itself, it’s best to call in a contractor like Roofing North Andover for this part of the process because while it may seem easy enough on paper, without proper experience and equipment it can be dangerous work, especially when using power tools above your head as you work. With that said, if your children or pets are playing around the house, this would be one of the best times to make sure they are inside because accidents can happen where the injury is concerned and even worse; having your new shingles damaged before completion.

Whichever way you plan on completing roof installation, these steps will help guide you along the way with some simple guidelines that any homeowner can handle with only a little experience under their belt. There’s no reason why you can’t complete it yourself if you don’t mind getting dusty, dirty, and sweaty in the process but remember that safety should always come first when using these types of tools so ask for help whenever possible!

Leave a Reply

Your email address will not be published.